PT Item – Digital Multimeter 3 1/2 Resolution (Fluke 17 B+) Source Mode

PT Round – PTC/ELTC/DGMM/001

PT Item – Fluke Make 3 1/2 Resolution Model 17 B+

Resolution and Range – AC Voltage – (40 Hz to 500Hz) – 4.000 V, 40.00 V, 400.0 V, 1000 V

– DC Voltage – 4.000 V, 40.00 V, 400.0 V, 1000 V

– AC / DC (millivolt)-  400.0 mV

–  AC current μA (40 Hz to 400 Hz) – 400.0 μA, 4000 μA

– AC Current mA(40 Hz to 400 Hz) – 40.00 mA, 400.0 mA

– AC current A (40 Hz to 400 Hz) – 4.000 A, 10.00 A

– DC current μA – 400.0 μA, 4000 μA

– DC current mA- 40.00 mA, 400.0 mA

– DC current A – 4.000 A, 10.00 A

Parameter – DC Current (10 mA to 10A) | DC Voltage (2 mV to 1000 V) | AC Current (100 mA to 10 A) | AC Voltage (100 mV to 700 V)

Measurement Points- DC Voltage – 2mV,200mV,2V,200V, 1000V
DC Current – 10mA, 100mA, 1A,5A, 10A
AC Voltage – 100mV, 200mV,2V,200V,700V at Frequency 50Hz
AC Current – 10mA, 100mA,1A,5A, 10A at Frequency 50Hz

Participation Criteria – The participating Laboratory should have Estimated Uncertainties > 3.04% to 0.029% for DC Voltage | 0.128% to 0.058% for DC Current | 0.083% to 0.06% for AC Voltage | 0.182% to 0.078% for AC Current

Delivery – Lab code will be delivered within 7 working days to the participating laboratory

Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT.

The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents – –

1. Raw data sheet(s) – PDF format

2. Uncertainty Budget Sheet(s) – PDF format

    

   Method used for PT Item measurement should be provided in the Annexure 1 – Result Sheet.

Registration- Open