Return to previous page
PT Item - 2D Height Gauge (On Site)

PT Item – 2D Height Gauge (On Site)

₹10,000.00
PT Round - PTC/MECH/DGHG/001 PT Item Description - Mahr make 2D Digital Height 0-600 mm (This is an onsite PT activity, where participants need to carry their instrument to Octagon's Laboratory at Pune and perform measurements). Accuracy of DUC - (1.8 + L/600) L in mm Parameter - instrumental error Measurement Points - 50,100,200,300, 500 & 600 mm Delivery - Lab code will be delivered within 7 working days to the participating Laboratory Participation Criteria - The participant laboratory should have CMC coarser than 2 μm Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Absolute Pressure Gauge

PT Item – Absolute Pressure Gauge

Original price was: ₹14,000.00.Current price is: ₹12,500.00.
PT Round - PTC/MECH/PRVC/006 PT Item Description - Absolute Pressure Gauge, Operating Range 0 to 4 bar, Resolution 0.0001 bar (abs), Accuracy ± 0.1% FS Parameter - Hydraulic Pressure - Range:0 to 4 bar Measurement Points - 0.4 bar, 0.8 bar, 1.2 bar , 3.0 bar , 4.0 bar Participation Criteria - Participant laboratory should have CMC greater than 0.003 % rdg (abs) Delivery - Lab code will be delivered within 7 working days to the participant laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open  
Add to cart
Sale
PT Item - Analog Durometer Shore A and Shore D

PT Item – Analog Durometer Shore A and Shore D

₹8,000.00 ₹12,000.00Price range: ₹8,000.00 through ₹12,000.00
PT Round - PTC/MECH/DURO/001 PT Item - Shore- A & D Digital Hardness Tester - Range 0-100 Shore , Resolution 1 Shore for A and D Parameter - Shore A and Shore D (0-100 Shore) Measurement Points - Shore A - 0,10, 20,30, 40,50,60,70,80,90 and 100 Shore D - 0,10, 20,30, 40,50,60,70,80,90 and 100 Participation Criteria - The participating Laboratory should have Estimated Uncertainties > 0.6% for Shore A & 0.3 % D Delivery- Lab code will be delivered within 7 working days to the participating Laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration- Open
Select options This product has multiple variants. The options may be chosen on the product page
Sale
PT Item - Analog Hydraulic Pressure Indicating Device

PT Item – Analog Hydraulic Pressure Indicating Device

Original price was: ₹14,000.00.Current price is: ₹11,500.00.
PT Round - PTC/MECH/PRVC/001 PT Item Description  - Analog Hydraulic Pressure Indicating Device, Operating Range 0 to 600 bar, L.C. 5 bar, Accuracy ± 0.5% FS Suggested Method of Measurement - Using Dead Weight Tester Parameter - Hydraulic Pressure - Range:0 to 600 bar Participation Criteria - Participant laboratory should have CMC greater than 0.009% rdg Measuring Points - 50,200,300,400 &550 bar Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration -  Open  
Add to cart
Sale
PT Item - Analog Lever Dial Gauge

PT Item – Analog Lever Dial Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/LEDG/001 PT Item - Analog Lever Dial Gauge L.C. 0.01 mm ;Range 0 to 0.8 mm Parameter - Instrumental Error Participation Criteria - the CMC of participant laboratory should be greater than 1.4 μm Measurement Points - Upward Direction (forward /Reverse) 0.10mm,0.50mm and 0.80 mm Downward Direction (forward /Reverse) 0.10mm,0.50mm and 0.80 mm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Bore Gauge with Dial

PT Item – Bore Gauge with Dial

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/BORG/001 PT Item - Bore Gauge with Dial 18-35 mm with dial 0.001 mm Parameter - Instrumental Error Measurement Points: 0.02mm, 0.15mm,0.36mm,0.58mm,0.82mm,1.00mm Participation Criteria - the participation laboratory should have CMC > 1 μm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
  Registration - Open
Add to cart
Sale
PT Item - Caliper

PT Item – Caliper

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/CALI/001 PT Item-  Digital Caliper 0-300 mm with L.C.0.01mm Parameter- Instrumental Error Participation Criteria- The CMC of participant lab. should be coarser to 11 μm Measurement Points: Ext. Measurements 50mm, 150mm,250mm| Int. Measurements 50mm, 150mm,250mm Depth Measurements 50mm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Cylindrical Pin

PT Item – Cylindrical Pin

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/CYMP/001 PT Item Description - Cylindrical Pin 1 mm, 5 mm and 10 mm Range : Up to 20 mm Parameter - Diameter at Marked Point Participation Criteria - The participant laboratory should have CMC coarser than 0.65 μm Delivery- Lab code will be delivered within 7 working days to the participating Laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Depth Micrometer

PT Item – Depth Micrometer

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/DMIC/001 PT Item Description - Depth Micrometer 0-25 mm L.C. 0.001 mm Parameter - Instrument Error Measurement Points - 4.8 mm, 17.3 mm and 25mm Participation Criteria - The participation Laboratory should have CMC coarser than 4 µm Delivery - Lab code will be delivered within 7 working days Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory.  Participation Criteria - The participant laboratory should have CMC coarser than 6 μm Note: Participation criteria is defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. However as per ISO/IEC 17043:2010 management system, a standard for PT provider’s accreditation, do not restrict PT provider to include any participant whose CMC’s are superior than reference lab. Octagon provides such choice to the participants to decide their participation in the above PT scheme. Registration - Open
Add to cart
Sale
PT Item - Dial Thickness Gauge

PT Item – Dial Thickness Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/DTKG/001 PT Item Description - Dial Thickness Gauge  - 0-10 mm Resolution- 0.01 mm Parameter - Instrument Error Measurement Points - 2.5 mm, 5.1mm and 7.7mm Participation Criteria : The participation Laboratory should have CMC coarser than 4.2 µm Delivery - Lab code will be delivered within 7 working days to the participant laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory.  Participation Criteria - The participant laboratory should have CMC coarser than 4.2 μm Note: Participation criteria is defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. However as per ISO/IEC 17043:2010 management system, a standard for PT provider’s accreditation, do not restrict PT provider to include any participant whose CMC’s are superior than reference lab. Octagon provides such choice to the participants to decide their participation in the above PT scheme.

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Digital External Micrometer

PT Item – Digital External Micrometer

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/MICR/001 PT Item Description - Digital Micrometer - External 0-25 mm Resolution- 0.001 mm Parameter - Instrument Error Measurement Points - 2.5 , 10.3, 25 mm Participation Criteria - The participation Laboratory should have CMC coarser than 0.90 μm Delivery - Lab code will be delivered within 7 working days to the participating Laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory.  Participation Criteria - The participant laboratory should have CMC coarser than 0.9 μm Note: Participation criteria is defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. However as per ISO/IEC 17043:2010 management system, a standard for PT provider’s accreditation, do not restrict PT provider to include any participant whose CMC’s are superior than reference lab. Octagon provides such choice to the participants to decide their participation in the above PT scheme.

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Digital Hydraulic Pressure Indicating Device

PT Item – Digital Hydraulic Pressure Indicating Device

Original price was: ₹14,000.00.Current price is: ₹11,500.00.
PT Round - PTC/MECH/PRVC/004 PT Item Description  - Digital Hydraulic Pressure Indicating Device, Operating Range 0 to 700 bar, L.C. 0.01 bar, Accuracy ± 0.1% FS Suggested Method of Measurement - Using Dead Weight Tester Parameter - Hydraulic Pressure - Range:0 to 700 bar Measurement Points- 100,200,350,500 and 650 bar Participation Criteria - Participant laboratory should have CMC greater than 0.009 % rdg Delivery - Lab code will be delivered within 7 working days Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open  
Add to cart
Sale
PT Item - Digital Hydraulic Pressure Indicating Device (Low Pressure Range)

PT Item – Digital Hydraulic Pressure Indicating Device (Low Pressure Range)

Original price was: ₹14,000.00.Current price is: ₹11,500.00.
PT Round - PTC/MECH/PRVC/005 PT Item Description - Digital Hydraulic Pressure Indicating Device, Operating Range 0 to 200 bar, L.C. 0.01 bar, Accuracy ± 0.1% FS Suggested Method of Measurement - Using Dead Weight Tester Parameter - Hydraulic Pressure: Range:0 to 200 bar Participation Criteria: Participant laboratory should have CMC greater than 0.009 % rdg Measurement Points: 50,100,125,150,175 bar Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior to accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs, then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open  
Add to cart
Sale
PT Item - Digital Pneumatic Pressure Gauge

PT Item – Digital Pneumatic Pressure Gauge

Original price was: ₹14,000.00.Current price is: ₹11,500.00.
PT Round - -PTC/MECH/PRVC/002 PT Item Description - Digital pressure indicating device, L.C. 0.01 bar, operating range 0-50 bar Parameter - Pneumatic Pressure - Range:0 to 50 bar Measurement Point: 5,10,15,20 and 35 bar Participation Criteria - Participant laboratory should have Unc. of measurement Coarser than 0.005 % rdg Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration- Open
Add to cart
Sale
PT Item - Digital Torque Wrench

PT Item – Digital Torque Wrench

Original price was: ₹15,000.00.Current price is: ₹12,000.00.
PT Round - PTC/MECH/TORQ/001 PT Item - Torque Wrench 500 Nm - Measurement Points 50,300, 500Nm Resolution - 0.1 Nm Parameter - Torque Participation Criteria - The CMC of participating lab. should be >0.2% Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Last date of Registration - Open
Add to cart
Sale
PT Item - Digital Vacuum Gauge

PT Item – Digital Vacuum Gauge

Original price was: ₹14,000.00.Current price is: ₹11,500.00.
PT Round - PTC/MECH/PRVC/003 PT Item Description - Digital Vacuum Gauge, Operating range -1 to 3 bar, L.C. 0.01 bar Parameter - Vacuum - Range:-1 to 0 bar Measurement Points: -0.1,-0.3,-0.5,-0.7 and -0.8 bar Participation Criteria - Participant laboratory should have Unc. of Measurement greater than 0.009% rdg Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
PT Item - Digital Weighing Balance (On Site)

PT Item – Digital Weighing Balance (On Site)

₹11,500.00
PT Round - PTC/MECH/WBAL/001 PT Item Description - Digital Weighing Balance RADWAG Make Option 1. Max. 220.0 g with readability 0.1 mg Option 2. Max. 3000 g with readability 1 mg Measurement Points - For 220 g - 50 g,100g and 200 g- Participant can use only E1 Class Weights For 3000g - 50g,100g,200g,500g,1000g,1500g and 2000g Participants can use E1/E2 Class Weights Parameter - Mass Delivery - Lab code will be delivered within 7 working days to the participating Laboratory Participation Criteria - The participant laboratory should have CMC for coarser than For balance of 220 g - 0.025 mg For balance of 3000 g. - 42 mg The participating Laboratory should carry their E1 / E2 class weights to Octagon Site for calibration of weighing balance up to 3000 g. A schedule will be shared to each participant laboratory. Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior to accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs, then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Select options This product has multiple variants. The options may be chosen on the product page
Sale
PT Item - Digital Weighing Balance Class III (On Site)

PT Item – Digital Weighing Balance Class III (On Site)

Original price was: ₹14,700.00.Current price is: ₹11,500.00.
PT Round - PTC/MECH/WBAL/001 PT Item Description - Digital Weighing Balance ACZET Pvt Ltd. Make 0- 15Kg Readability 1g Measurement Points for Performance Test - 0.01Kg, 0.05Kg, 0.5Kg, 1Kg,2Kg, 5Kg, 7Kg, 10Kg,12Kg and 15Kg Eccentricity Test - 5Kg Repeatability Test - 15Kg, 7Kg and 0.05Kg Parameter - Mass Delivery - Lab code will be delivered within 7 working days to the participating Laboratory Participation Criteria - The participant laboratory should have CMC for coarser than 650 mg The participating Laboratory should carry their F1, F2 class to Octagon's Site for calibration of weighing balance up to 15 kg. A schedule will be shared to each participant laboratory. Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - F1 Class Weights

PT Item – F1 Class Weights

Original price was: ₹14,000.00.Current price is: ₹11,500.00.
PT Round - PTC/MECH/MASS/001 PT Item - Weights Parameter - Mass 2g (E1 Class), 20g (E1 class), 200g (E1 Class) and 500g (E2 Class) Participation Criteria - The participant laboratory’s CMC should be coarser than 0.002 mg for 2 g, 0.005 mg for 20g, 0.026 mg for 200 g and 0.25 mg for 500 g  (Participant can use only F1 or better Class Weights) Delivery - Lab code will be delivered within 7 working days to the participant laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Feeler Gauge

PT Item – Feeler Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/FEEG/001 PT Item Description - Feeler Gauge of three different sizes up to 1 mm (three leaf) Parameter - Thickness Participation Criteria - The participant laboratory should have CMC coarser than 0.65 μm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Gauge Block (Tungsten Carbide)

PT Item – Gauge Block (Tungsten Carbide)

Original price was: ₹10,000.00.Current price is: ₹8,500.00.
PT Round - PTC/MECH/GABL/001 PT Item - Gauge Block (Tungsten Carbide) Parameter - Central Length Deviation for 1.5,40and 90 mm Participation Criteria - The participant laboratory's CMC should be greater than 0.02 + L/ 3000 μm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Granite Surface Plate (On Site)

PT Item – Granite Surface Plate (On Site)

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/SUPL/001 PT Item Description - Granite Surface Plate 1000 X 630 mm (This is an onsite PT activity, where participants needs to carry their instrument to Octagon's Laboratory at Pune and perform measurements). Parameter - Flatness Delivery - Lab code will be delivered within 7 working days to the participating laboratory Participation Criteria - The participant laboratory should have CMC coarser than 3.5 μm Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Load Cell

PT Item – Load Cell

Original price was: ₹14,000.00.Current price is: ₹11,500.00.
PT Round - PTC/MECH/LDCL/001 PT Item - 20210 S BEAM LOAD CELL; Display – 50000 counts as per load cell cap. In N Divisions: 50000; Resolution: 1Division Parameter - Force up to 500 N Participation Criteria - The participant laboratory's CMC should be greater than 0.03% rdg, L.C.0.01 N Measurement Points - 50,100,150,200,250,300,350,400,450 and 500 N Delivery - Lab code will be delivered within 7 working days to the participant laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration -Open
Add to cart
Sale
PT Item - Master Ring

PT Item – Master Ring

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/PLRG/001-2 PT Item - UPTO THREE SIZES Parameter -  Diameter Participation Criteria - The participation Laboratory should have CMC > 0.8 μm PT Items - 5mm,26mm and 76mm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Measuring Tape

PT Item – Measuring Tape

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/TAPE/001 PT Item Description - Measuring Tape - 5 Meter, L.C. 1mm ; Calibration Points 10mm, 50mm, 100mm, 1000mm, 3000 mm and 5000mm Parameter - Instrument Error Delivery - Lab code will be delivered within 7 working days Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory.  Participation Criteria - The participant laboratory should have CMC coarser than ±50 µm √L - L is in meter Note: Participation criteria is defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. However as per ISO/IEC 17043:2010 management system, a standard for PT provider’s accreditation, do not restrict PT provider to include any participant whose CMC’s are superior than reference lab. Octagon provides such choice to the participants to decide their participation in the above PT scheme. Registration - Open
Add to cart
Sale
PT Item - Micrometer Setting Standard

PT Item – Micrometer Setting Standard

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/MISS/001 PT Item - Micrometer Setting Standard 25 mm & 75 mm Parameter - Length Participation Criteria - The CMC of participating lab. should be coarser to 1 μm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Plain Plug Gauge / Outer Diameter Plugs

PT Item – Plain Plug Gauge / Outer Diameter Plugs

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/PLPG/001 PT Item Description - Outer Diameter Plugs / Plain Plug Gauge of sizes 5 mm,36.5mm and 98 mm Parameter - Out Side Diameter PT items of sizes - ø 5.00 mm, ø36.50 mm, ø 98.00 mm Participation Criteria - The CMC of participant laboratory should be coarser than 1 μm Delivery - Lab code will be delivered within 7 working days to the participant laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Plain Taper Ring Gauge

PT Item – Plain Taper Ring Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/TPRG/001 PT Item Description - Taper Ring Gauge of sizes ø 35mm & ø 25mm Range : up to 100 mm Parameter - Diameter Participation Criteria - The participant laboratory should have CMC greater than 1 μm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Plunger Dial Gauge

PT Item – Plunger Dial Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/PLDG/001 PT Item - Analog Plunger Dial Gauge L.C. 0.001 mm; Range 0 to 1 mm Parameter - Instrumental Error Measurement Points: Plunger In / Out 0.12mm,0.30mm,0.48mm,0.64mm, 0.86mm,1.00mm Participation Criteria - the CMC of participant laboratory should be coarser than 1 μm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Push-pull gauge (Force Gauge)

PT Item – Push-pull gauge (Force Gauge)

Original price was: ₹14,000.00.Current price is: ₹11,500.00.
PT Round - PTC/MECH/PSPL/001 PT Item - Push-pull gauge (Force Gauge - up to 1000N) L.C. 0.1 N Parameter - Force Participation Criteria -The Participating Laboratory should have CMC > 0.01% Measurement Points: 100, 200, 500, 700 and 1000 N Delivery - Lab code will be delivered within 7 working days to the participant Laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Snap Gauge

PT Item – Snap Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/SNAP/001 PT Item Description - Snap Gauge - up to 100mm Parameter - Gap Size - 81.6 mm Go and NOGO Participation Criteria - The participation Laboratory should have CMC coarser than 0.8 µm Delivery - Lab code will be delivered within 7 working days to the Participant Laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory.  Participation Criteria - The participant laboratory should have CMC coarser than 0.8 μm Note: Participation criteria is defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. However as per ISO/IEC 17043:2010 management system, a standard for PT provider’s accreditation, do not restrict PT provider to include any participant whose CMC’s are superior than reference lab. Octagon provides such choice to the participants to decide their participation in the above PT scheme.

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Sound Level Meter

PT Item – Sound Level Meter

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/SOUN/001 PT Item Description - Sound Level Meter, Fluke Make 945 , Calibration point - 94dBA @1KHz Resolution- 0.1 dBA Participation Criteria  - The participation Laboratory should have CMC coarser than 0.8 dBA Parameter - Sound Level Delivery - Lab code will be delivered within 7 working days to Participant Laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory.  Participation Criteria - The participant laboratory should have CMC coarser than 0.8dBA Note: Participation criteria is defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. However as per ISO/IEC 17043:2010 management system, a standard for PT provider’s accreditation, do not restrict PT provider to include any participant whose CMC’s are superior than reference lab. Octagon provides such choice to the participants to decide their participation in the above PT scheme.

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Taper Plug Gauge

PT Item – Taper Plug Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/TPPG/001 PT Item Description - Taper Plug Gauge of sizes ø 50mm & ø 38mm Parameter - Diameter & Angle Participation Criteria - The participant laboratory should have CMC greater than 1.2 μm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Taper Thread Plug Gauge

PT Item – Taper Thread Plug Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/THPG/001 PT Item - Taper Thread Plug Gauge up to 50mm Parameter - Effective Diameter The PT items-  3" BSPT SY -B Participation Criteria -The CMC of participating lab. should be coarser to 2 μm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
The Registration is Open
Add to cart
Sale
PT Item - Thread Plug Gauge

PT Item – Thread Plug Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/DIMN/001 PT Item - Thread Plug Gauge up to 1000mm Parameter - Simple Effective Diameter Participation Criteria - The CMC of participating lab. should be coarser to 1.30 μm PT items of sizes - M8 X 1.25 6H Go M36 X 1.5 7H Go 2 X 12 UNC – 2B SPL NOGO Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Thread Ring Gauge

PT Item – Thread Ring Gauge

Original price was: ₹8,500.00.Current price is: ₹7,000.00.
PT Round - PTC/MECH/PTRG/001 PT Item - Thread Ring Gauge with form error less than 1 μm Range : up to 100 mm Parameter - Simple Effective Diameter for sizes M 5 X 0.8 -6g NOGO, M 40 X 3.0 -6g GO and G3 X11 ISO-228 B NOGO Participation Criteria - The participant laboratory's CMC should be greater than 1.1 μm Delivery - Lab code will be delivered within 7 working days to the participating laboratory Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 
It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -
  1. Raw data sheet(s) - PDF format
  2. Uncertainty Budget Sheet(s) - PDF format
  Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Registration - Open
Add to cart
Sale
PT Item - Torque Sensor

PT Item – Torque Sensor

Original price was: ₹45,000.00.Current price is: ₹36,000.00.
PT Round - PTC/MECH/TOSN/001 PT Item - Torque Sensor up to 1000Nm - Measurement Points 25,100,150,175,500,700 & 1000 Nm Resolution - 0.1 Nm Parameter - Torque Participation Criteria - The CMC of participating lab. should be >0.03% Delivery - Lab code will be delivered within 7 working days Note: Participation criteria defined above, is based on present NABL practice of ILC, where CMC of reference lab should be superior (smaller measurement uncertainty) than the participant’s CMC. All Participant labs should ensure that the participation criteria have been met while applying for the PT. The participant lab should not report estimated uncertainty, superior than accredited CMCs for that parameter for PT measurements. If Estimated uncertainty is coarser to accredited CMCs then Estimated uncertainty should be reported by the participant laboratory. 

It is mandatory for Participating Lab. to submit PT measurement results along with the following documents - -

  1. Raw data sheet(s) - PDF format

  2. Uncertainty Budget Sheet(s) - PDF format

      Method used for PT Item measurement should be provided in the Annexure 1 - Result Sheet.
Last date of Registration - Open
Add to cart